User Guide
Table Of Contents
- Product List
- Get to Know SMOOTH-Q3
- Battery Charging Instruction
- Installation and Balance Adjustment
- Stabilizer Mode Description
- Indicator Lights and Buttons Description
- Balancing the Phone
- How to Use
- Standby Mode
- Manual Angle Lock
- How to Use the App
- Main App Features
- Calibration and Firmware Upgrade
- Six-side Calibration
- SMOOTH-Q3 Firmware Upgrade
- Motor Fine-Tuning
- Product Specifications
- Disclaimer and Warnings
- Safe Operation Guidelines
- Warranty Card
- Contact Card
25
Disclaimer and Warnings
Safe Operation Guidelines
WARNING:
1. Never allow the product to come into contact with any liquid. Never immerse the
product in water or make it get wet. Never use the product in the rain or a humid
environment. Corrosion reaction may occur when the interior of the product is
exposed to water, which may cause the battery to ignite spontaneously and may
even cause an explosion.
2. If the product catches fire, please use water or water mist, sand, fire blanket, dry
powder, carbon dioxide fire extinguisher immediately to put out the fire. Please
choose the method according to the actual situation.
3. Please use the product in an environment with a temperature between -10° C and
45° C.
4. It is forbidden to disassemble the product in any way. If the battery is pierced
during disassembly, it will cause the electrolyte inside the battery to leak or even
cause fire or explosion.
5. Mechanical impact, rolling, or throwing of the product is prohibited. Do not place
heavy objects on the product.
6. Do not heat the product. Do not place the product in a microwave oven or
pressure cooker.
7. It is forbidden to place the product near a heat source (stove or heater, etc.) or
inside the car in hot weather. Do not store the product in an environment above
45° C. The ideal temperature of storage is 22℃ to 28° C.
8. Do not store the battery for a long time after it is completely discharged to avoid
the battery entering the over-discharged state and causing damage to the battery
cell, and it will not be able to resume use.
BE CAREFUL:
1. SMOOTH-Q3 is a high-precision control device. Damage may be caused to
SMOOTH-Q3 if dropped or subject to external force, and this may result in
malfunction.
2. Make sure the rotation of the stabilizer axes is not blocked by external force when
SMOOTH-Q3 is turned on.
3. SMOOTH-Q3 is not waterproof. Prevent contacts of any kind of liquid or cleaner
with the SMOOTH-Q3. It is recommended to use dry cloth for cleaning.
4. Protect SMOOTH-Q3 from dust and sand during use.
CAUTION:
1. After the charging is complete, disconnect the product from the charger.
2. If you do not use the product for more than 10 days, please charge/discharge the
battery to 40%-65% and store it to extend the battery life.
3. Recharge and discharge every 3 months to keep the battery active.
4. Keep the handle stable when powering on the SMOOTH-Q3. Shakiness during
power-on may fail to start.