User Manual
Table Of Contents
- Packing List
- Get to Know CRANE-M2
- Charging Procedure
- Installation and Balancing
- Balance Adjustment Method
- Smartphone Installation
- GoPro Camera Installation
- How to Use
- Display Screen Description
- Micro USB Power Outlet Usage
- Manual Angle Lock
- Control Mode Description
- Motor Torque Adjustment
- Menu Option Description
- APP Operations
- Calibration and Firmware Upgrade
- Six-Side Calibration
- Firmware Upgrade
- Motor Fine-Tuning
- Calibration and Firmware Upgrade
- Product Specifications
- Disclaimer and Warning
- Warranty Terms
- Contact Card
6
Installation
GoPro Camera Installation
1. Put GoPro camera into a GoPro
camera cage (not included in the
package). Follow the steps in “Camera
Installation” to mount GoPro camera
with its camera cage on the stabilizer.
Balance the combo according to the
steps listed in “Balance Adjustment
Method”.
2. The stabilizer is ready for use when it
is well balanced as shown above.
1. Put smartphone into the phone
holder and follow the steps in “Camera
Installation” to mount smartphone with
phone holder on the stabilizer. Balance
the combo according to the steps
listed in “Balance Adjustment Method”
(adjustable range of the phone holder is
59-90mm).
2. The stabilizer is ready for use when it
is well balanced as shown above.
There are two 1/4" threaded holes on the phone holder. Please use the shallower
one for mounting phone holder on CRANE-M2 and use the deeper one for
mounting on the tripod.
Smartphone Installation