User Manual
Table Of Contents
- Packing List
- Get to Know CRANE-M2
- Charging Procedure
- Installation and Balancing
- Balance Adjustment Method
- Smartphone Installation
- GoPro Camera Installation
- How to Use
- Display Screen Description
- Micro USB Power Outlet Usage
- Manual Angle Lock
- Control Mode Description
- Motor Torque Adjustment
- Menu Option Description
- APP Operations
- Calibration and Firmware Upgrade
- Six-Side Calibration
- Firmware Upgrade
- Motor Fine-Tuning
- Calibration and Firmware Upgrade
- Product Specifications
- Disclaimer and Warning
- Warranty Terms
- Contact Card
14
Manual Angle Lock
Micro USB Power Outlet Usage
Under pan following mode (PF) and locking mode
(L), you can manually rotate the camera to a
certain angle, then loosen the grip and the camera
position will be fixed. Under pan following mode
(PF), you can manually adjust the angle of tilt axis.
Under locking mode (L), you can manually adjust
the angle of pan axis and tilt axis.
Connect the Micro USB port on the stabilizer
to the charging port on the camera with an
appropriate cable (not included in the package).
The stabilizer will start charging the camera after it
is turned on.
DO NOT charge the stabilizer via the Micro
USB port on the tilt axis arm. Otherwise, the
circuit board may be burnt.
How to Use