User Manual
Table Of Contents
- Packing List
- Get to Know CRANE-M2
- Charging Procedure
- Installation and Balancing
- Balance Adjustment Method
- Smartphone Installation
- GoPro Camera Installation
- How to Use
- Display Screen Description
- Micro USB Power Outlet Usage
- Manual Angle Lock
- Control Mode Description
- Motor Torque Adjustment
- Menu Option Description
- APP Operations
- Calibration and Firmware Upgrade
- Six-Side Calibration
- Firmware Upgrade
- Motor Fine-Tuning
- Calibration and Firmware Upgrade
- Product Specifications
- Disclaimer and Warning
- Warranty Terms
- Contact Card
5
收纳状态
When pressing down and locking the roll axis, the locking pin will bounce up to lock
the tilt axis as well; When unlocking and lifting the roll axis, the locking pin will retract
automatically to get the stabilizer ready for work.
Installation and Balancing
1. Lock the latch button
under pan axis;
4. The stabilizer is
folded up for storage.
3. Press down and
stick roll axis to pan
axis by the locking
pin; Tighten the roll
axis thumb screw to
finalize;
2. Fold the tilt axis in
line with the roll axis as
shown in the picture;
收纳状态
收纳状态
收纳状态