User Manual

10
How to Use
Buttons Description
1
3
4
6
7
8
7
9
10
11
12
13
14
15
5
2
❶
Focus/Zoom Control Wheel*
Once connected to the servo follow focus motor, the focus/zoom control wheel
on the gimbal will be able to drive the follow focus motor.
❷
Following Mode
●
Press to enter into F (Following) Mode
●
Double press to reset the motor position
●
Triple press to realize 180° rotation on pan axis motor
❸
PhoneGo Mode[
GO
]
Press the GO button to enter PhoneGo Mode which enables faster following
speed of the three axes on the stabilizer.
❹
Mode Switch
●
Dial up and the stabilizer enters into PF (Pan Following) Mode.
●
Dial down the stabilizer enters into L (Locking) Mode.
❺
POV Mode [
POV
]
●
Single press to enter or exit POV (Point of View) Mode.
●
Double press to enter or exit V (Vortex) Mode
●
Long press for 2 seconds to enter or exit standby Mode.
❻
ON/OFF [ ]
Long press for 2 seconds to power on/off the stabilizer.
❼
OLED Display
Stabilizer status and camera parameters (see more on Page 12 )
*When the stabilizer is properly installed with the follow focus CMF-04 (needs
to be purchased separately), the focus or zoom control function can be
achieved by installing the gear ring on either the focus or zoom channel of the
lens. WEEBILL LAB does not support synchronous zoom & focus control.