User Manual

3
Preparing and Charging the Batteries
When using WEEBILL LAB for the first time, please fully charge and activate
the batteries with the dedicated charging device contained in the package to
ensure normal use of the product.
Charger and Battery Description
Charger Specifications
Name: 18650*2 Li-ion Battery Charger
Model: ZC-18650-2
Input: 5V : 2400mA
Output: 4.2V : 800mA*2
•
Shines solid RED light when charging.
•
Shines BLUE light when fully charged.
Battery Specifications
Name: 18650 Li-ion Battery
Model: IMR 18650 MP
Capacity: 2600mAh
Voltage: 3.7V
1. The stabilizer is equipped with high-energy density batteries, which
may cause fire, economic loss or personal injury when not properly used
and stored. Please read the disclaimer and warning herein as well as the
description on the battery label carefully before using the batteries.
2. Please use batteries provided or approved by ZHIYUN only. ZHIYUN will
not take any responsibility for explosion, fire and/or accidents caused by
non-ZHIYUN batteries.
When the batteries are not in use, please be sure to put them in the
battery slot of the package or in plastic storage cases (the storage case
needs to be purchased separately).
Status Indicator Light