ZHIYUN-EN-v1.
Contents ■■ Packing list Packing list······················································································1 ■■ Getting to know the SMOOTH-XS Getting to know the SMOOTH-XS····················································2 ■■ Charging and Battery ■■ Installation and Balance Adjustment ■■ How to Use the SMOOTH-XS Indicator and Control Buttons···························································7 Operation Modes···········································································
Warranty Period···············································································17 Warranty Exclusions·········································································17 ZHIYUN Warranty Claim Procedure···················································17 ■■ Contact Card
Packing list Packing list The product package comes with the following items. If there are any missing items, please contact ZHIYUN or your local distributor.
Getting to know the SMOOTH-XS Getting to know the SMOOTH-XS 1. Phone Holder 10. Roll Axis Motor 2. Vertical Arm 11. Power Indicator 3. USB Type-C Charging/Firmware Update Port 12. Power Button 4. Pan Axis Motor 14. Tilt Adjustment Joint 5. Mode Indicator 15. Extendable Rod 6. Stabilizer Joystick 16. Handle 7. Zoom Slider 17. Wrist Strap Hole 8. M Button 18. 1/4" Threaded Hole 13. Contact Point 9.
Charging and Battery The SMOOTH-XS uses built-in batteries. Before using the SMOOTH-XS for the first time, please charge it fully to activate the batteries and ensure the appropriate use of the product. Charging method: Connect the Type-C cable provided in the package with the adapter (5V/2A recommended, not included) to the port on the stabilizer’s vertical arm. Charging completes when the four indicator lights turn white (when the stabilizer is powered off).
Installation and Balance Adjustment 1. Rotate the handle 180° counterclockwise. 2. To ensure good contact with the contact points, pull the pan axis motor to the bottom of the vertical arm while holding the roll and pan axes motors, until you hear a “click” sound. Before each use, make sure to unfold the SMOOTH-XS and ensure good contact with the contact points before powering the device on.
Installation and Balance Adjustment 3. Rotate the phone clamp 90° clockwise. 4. When mounting the phone, make sure the phone camera is on the left side of the clamp. Then, adjust the balance for shooting in landscape or portrait mode. When shooting in landscape or portrait mode, move the smartphone left or right in the phone holder until the smartphone is able to maintain a natural balance. ① When mounting the smartphone, please make sure that the smartphone is fixed in the phone clamp firmly.
Installation and Balance Adjustment There is a built-in lock design in the stabilizer’s roll axis and pan axis for convenient storage and transportation when the stabilizer is powered off. Rotate the smartphone clamp and pan axis to the lock position to lock them. Unlock the stabilizer before use. If the phone is not perpendicular to the ground after mounting, you may unfold the telescopic rod slightly and rotate the tilt axis clockwise. The phone will then be perpendicular to the ground.
How to Use the SMOOTH-XS Indicator and Control Buttons ❶Power Indicator • When the stabilizer is powered off and charging, the white LED indicators will blink successively to indicate the current battery level. • When the stabilizer is powered on, the white LED indicators indicate the current battery level. One solid white indicator light indicates that the battery level is at 0-25%. Two solid white indicator lights indicate that the battery level is at 25-50%.
How to Use the SMOOTH-XS Operation Modes Press the M button once or four times to switch modes. Default Settings Press the M Button once Pan Follow Mode Press the M Button four times Lock Mode Press the M Button once Roll and Pan Follow Mode The red circle indicates that the motor will rotate along with the grip movement. The gray circle means the motor is locked and cannot move along with the grip movement. Pan Follow Mode: Press the M button once.
How to Use the SMOOTH-XS Lock Mode: Press the M button once. This mode locks the movement of both axes and the orientation of the smartphone is fixed. Push the joystick up/down to control the roll axis angle, and push left/right to control the pan axis. Roll and Pan Follow Mode: Press the M button four times. The roll axis motor and pan axis motor move following the grip movement in this mode. Push the joystick up/down to control the roll axis angle, and push left/right to control the pan axis.
How to Use the SMOOTH-XS Press the M button twice to switch modes. Default Settings Landscape Mode Press the M button twice Portrait Mode Landscape Mode & Portrait Mode: Double press the M button. Landscape Mode Portrait Mode Extension Mode: Hold the stabilizer grip with your left hand and hold the bottom cover of the pan axis motor with the thumb and middle finger of your right hand. Then, hold the top of the pan axis motor with your index finger to extend or retract the rod.
How to Use the SMOOTH-XS Standby Mode • When the SMOOTH-XS stabilizer is powered on, rotate the roll axis or pan axis manually until the axis triggers the built-in locking device. The SMOOTH-XS will then enter Standby Mode automatically. Unlock the roll axis and pan axis to wake the SMOOTH-XS stabilizer. Before restarting the SMOOTH-XS stabilizer, make sure the roll axis and pan axis are unlocked.
How to Use the App How to Use the App Scan the QR code on the left (Android 7.0 and above or iOS 10.0 and above) or search "ZY Cami" in the App Store or Google Play to download the app. ① Users can make better use of the various functions of the SMOOTH-XS with the dedicated “ZY Cami” app. ② ZY Cami is subject to updates without notice. Please always refer to the latest version. How to Connect 1. Power on the stabilizer and turn on Bluetooth on the smartphone. 2. Launch the “ZY Cami” app.
Firmware Upgrade SMOOTH-XS Firmware Upgrade USB When upgrading the firmware, extend the SMOOTH-XS to ensure that there is good contact with the contact points before performing the upgrade. Method one: Connect the USB port on the SMOOTH-XS stabilizer to the computer with a USB Type-C cable for firmware upgrade and online calibration. 1. Visit the official ZHIYUN website (www.zhiyun-tech.com), go to the corresponding product page and click “Download”.
Product Specifications Product model: SM110 Minimum Standard Maximum Operation Voltage 3.4V 3.7V 4.2V Operation Current 3000mA 220mA - Charging Voltage (input) 4.7V 5V 5.
Disclaimer and Warnings Thank you for purchasing the SMOOTH-XS. The information contained herein relates to your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow the instructions and warnings herein may result in serious injury to you or bystanders, or damage to the SMOOTH-XS or other property.
Disclaimer and Warnings Safe Operation Guidelines Warning: 1. Do not let the product come into contact with any kind of liquid. Do not leave product out in the rain or near any source of moisture. If the insides of the product come into contact with water, corrosion may occur, potentially resulting in the battery catching on fire, or even an explosion. 2.
Warranty Card Warranty Period 1. Customers are entitled to a replacement or free repair services for product defect(s) found within 15 days upon receipt of the product. 2. The default warranty period for products that are properly used and maintained is one year from the date of receipt. The warranty period may vary due to differences in product parts, and laws and regulations of different countries and regions.
Contact Card Website Weibo Vimeo Google+ Facebook (Zhiyun Support) Facebook (Zhiyun Tech) Youku Youtube Wechat Instagram 18
Contact Card Tel: +86 400 900 6868 USA Hotline: +1 808-319-6137,9:00-18:00 GMT-7,Mon-Fri Europe Hotline: +49(0)61018132180,10:00-17:00 GMT+1,Mon-Fri Web: www.zhiyun-tech.com E-mail: service@zhiyun-tech.com Address: 09 Huangtong Road, Tieshan Industrial Zone, Qixing District, Guilin, 541004, Guangxi, China Certificate of Quality CertificateofQuality This product is confirmed to meet quality standards and permitted for sale after strict inspection.