User's Guide
Table Of Contents
- Packing List
- Get to Know SMOOTH-Q2
- Battery Charging Instruction
- Mounting and Balancing Mobile Phone
- How to Use
- Mobile Phone Charging
- Manual Angle Lock
- APP Operations
- Calibration and Firmware Upgrade
- Firmware Upgrade
- Motor Fine-Tuning
- Product Specifications
- Disclaimer and Warning
- Safe Operation Guidelines
- Warranty Terms
- Contact Card
8
Quick Switch to Standby Mode
How to Use
Vortex Mode (V): Double click the joystick to switch to this mode.
The tilt axis rotates 90° and revolves following the movement of the stabilizer handle.
Push the joystick left/right to control the pan axis.
• Under the power-on state, put the horizontal arm down manually and the horizontal
arm will be automatically locked into the built-in fixing buckle, then the stabilizer
enters standby mode. Please pull the horizontal arm out of the built-in fixing buckle
manually to restart or exit the standby state.
• Exit standby mode by resetting the horizontal arm.