使用说明书 TWS‐P3 立体声分体式无线耳机 敲击控制 蓝牙版本 5.
耳机 佩戴耳机 如下图将耳机轻轻塞入耳朵，并轻轻摇摆头部耳机不晃动为宜
规格参数 型号：P3 蓝牙版本：5.0 通讯距离：10 米（无障碍空旷环境） 电源输入：DC 5V‐1A, 输出：DC 5V‐150mA. 耳机输入：DC 5V‐100mA 电池类型：锂离子聚合物电池. 充电仓电池容量：220mAh.
充 电 盒 充电盒充电中或 耳机充电中 无 无 无 耳机 正在等待建立蓝 牙配对 正在充 电 已连接但为播放 音乐 耳机正在待机 中，需手动连接 佩戴中若有嘟嘟声： 耳机电量不足 开机 耳机在充电盒内，从充电盒种拿出耳机自动开机。 耳机不在充电盒内，轻敲耳机（蓝灯亮起即开机）。 关机 放入充电盒种，耳机自动关机。 开机状态下，无工作放置 60 秒，自动关机。 如何配对 1.耳机从充电仓拿出,耳机自动开机,指示灯闪烁,大约 1‐2 秒后其中一个 耳机指示灯熄灭,即双耳配对成功. 2.打开手机蓝牙,搜索蓝牙名:P3_L, 点击连接. 再次为同一台手机使用时,耳机开机后会自动配对并连接;若为另一台手机 使用,重复以上 1‐2 操作. 双耳使用 自动连接: 1. 将两耳机从充电盒取出,等待 3 秒耳机自动开机串联,其中 一个耳机指示灯熄灭,即双耳配对成功. 2.
手动连接：耳机关机时，手动开启其中一只耳机，待耳机灯慢闪 时，打开手机蓝牙搜索连接 P3_R 或者 P3_L 注意事项 请避免在沐浴或雨中使用本产品,并存放在干燥通风的环境下,以免影响 产品性能. 为保证连接顺畅,建议手机和耳机之间的距离在 10 米范围内. 耳机在电量充足状态,通话或听歌时有卡顿现象,建议关机重新配对连接. 服务网址：www.zzkjsz.com 微信公众号：PIO_ZZKJ 品牌：智梓科技 地址：深圳市罗湖区深南东路 2017 号华乐星苑大厦 1210/1211 此说明书仅供参考，产品实物与示意图或有差异，请以实物为准。 User Manual TWS‐P3 WIRELESS EARBUDS Tap control Bluetooth version 5.
Package list Bluetooth Earbuds 2pc Charging Case 1pc Earbuds Tips 3sets USB charging cable 1pc User manual 1pc Product schematic diagram Wear Earbuds Put earbuds in your ear slightly, and then shake your head gently to see whether the earbuds are fixed.
Specification Model：P3 Bluetooth version：5.0 Power input：DC 5V‐1A charging case battery：220mAh Earbud battery capacity：35mAh Call/play time：about 3.
耳机 Waiting for pair or connection Charging Standby Standby Power off Low Battery When you hear ‘Du, Du’, Earbud is in low battery. How to power off/on: Install it back to the charging case, Earbuds will auto charge and power off. Pick Earbuds out from the charging case, it will power on and pair automatically. If the earbuds is out of the case, it can power off by disconnecting for 60 seconds and wake it up by tapping.
Pay attention Please avoid using this product in the shower or in the rain, and please store in a dry and ventilated environment to avoid affecting product performance. To ensure great connection performance, please keep the bluetooth distance within 10m.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
