Network Hardware User Manual

DSLAM Interconnect Configuration
4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide
73
7 Enter a MAC address to search for a MAC table entry, or an IP address to
search for an IGMP table entry.
8 Click on the appropriate Submit button.
DSLAM Interconnect Configuration
Use the DSLAM Interconnect Configuration screen to specify a port
connected to a downstream 4900 Series DSLAM. This information is used to
configure internal traffic flows. The screen is accessed using the blue button
above the Ethernet uplinks on the schematic representation of the faceplate on
the home page.
Downlink
Button