User`s guide

Basic configuration
66 EtherXtend User’s Guide
Managing the EtherXtend with ZMS
The system profile contains parameters that configure the system contact
information for the EtherXtend and connection information for the ZMS. This
profile does not need to be modified in order to manage the EtherXtend with
ZMS.
Note: For details on using ZMS, refer to the ZMS Administrator's
Guide and the NetHorizhon User's Guide.
CLI provisioning and ZMS
CLI configuration of a device being managed by the ZMS is disabled by
default. Attempting to configure the device results in an error:
zSH> update system 0
Provisioning via CLI is currently not available.
If you need to configure the device from the CLI, use the resetcliprov
command.
If you plan to use a script to provision the device from the CLI while it is
being managed by the ZMS:
1 Update the system profile to disable partial config syncs to ZMS:
zSH> update system 0
Please provide the following: [q]uit.
syscontact: ----------> {Zhone Global Services and Support 7001 Oakport
Road Oakland Ca. (877) Zhone20 (946-6320) Fax [phone]
[e-mail]}:
sysname: -------------> {Zhone MALC}:
syslocation: ---------> {Oakland}:
enableauthtraps: -----> {disabled}:
setserialno: ---------> {0}:
zmsexists: -----------> {true}: false
zmsconnectionstatus: -> {inactive}:
zmsipaddress: --------> {192.168.210.28}:
configsyncexists: ----> {false}:
configsyncoverflow: --> {false}:
configsyncpriority: --> {high}:
configsyncaction: ----> {noaction}:
configsyncfilename: --> {192.168.8.21_4_1014067321329}:
configsyncstatus: ----> {synccomplete}:
configsyncuser: ------> {cfgsync}:
configsyncpasswd: ----> {}: ** private **
numshelves: ----------> {1}:
shelvesarray: --------> {}:
numcards: ------------> {3}:
ipaddress: -----------> {192.168.8.21}:
alternateipaddress: --> {0.0.0.0}:
countryregion: -------> {us}:
primaryclocksource: --> {0/0/0/0/0}: