User's Manual

Technical Specifications
ADSL2+ 4Port Modem
2007/01/10 13:49:16
Dimensions
■ 1.2" (3.0cm) High x 6.5" (16.5cm) Wide x 4.4"
(11.2cm) Deep
Weight
■ 1.5 lbs (0.7 kg)
Power
■ 100 VAC, 50 Hz
■ 110 VAC, 60 Hz
■ 220 VAC, 50/60 Hz
Interfaces
■ DSL Line: RJ11
■ Ethernet: 4 Port 10/100BaseT, Auto MDI/MDIX
Standards Support
■ ATM Support
- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back
- Support for 8 PVC's
- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)
■ Routing/Bridge Support
- Transparent Bridge Support
- DHCP Server/Relay/Client
- DNS Relay Agent
- Dynamic DNS Support
- DMZ support
- Static Routing
- RIPv1 and RIPv2
- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)
- IGMP v1/v2
■ PPP Support
- PAP/CHAP authentication
- PPPoA
- PPPoE
■ Security
- NAT for Basic Firewall support
- Ingress and Egress Packet Filtering
- Parental Control
- MAC Filtering
- Stateful Packet Inspection
■ DELT support
Protocol Support
■ ANSI T1.413 (Full Rate ADSL)
■ ITU G.992.1 (DMT)
■ ITU G.992.2 (G.lite)
■ ITU G.992.3 (ADSL2)
■ ITU G.992.5 (ADSL2+)
■ ITU G.994.1 (G.hs)
■ ITU G.997.1
■ Annex L
■ Annex M
Management
■ Web-based Configuration GUI
■ CLI
■ Telnet Remote Management
■ FTP/TFTP firmware upgrade and configuration
backup/restore
■ Syslog Support
■ TR-069 Support
■ SNMP Support
■ UPnP Support
Regulatory Compliance
■ FCC Part 15, Part 68
■ CE
■ UL
■ TUV
■ RoHS compliant
Operating Requirements
■ Operating Temperature: 32° F to 104° F (0° C to
40° C)
■ Storage Temperature: –4° F to 149° F (–20° C to
65° C)
■ Humidity: 5% to 95%, non-condensing
Ordering Information
6212-I3-200 ADSL2+ CPE Router, 4 Port Ethernet Switch, N.A.
6212-I3-300 ADSL2+ CPE Router, 4 Port Ethernet Switch, U.K.
6212-I3-302 ADSL2+ CPE Router, 4 Port Ethernet Switch, EURO
6212-I3-304 ADSL2+ CPE Router, 4 Port Ethernet Switch, India
6212-I3-600 ADSL2+ CPE Router, 4 Port Ethernet Switch, Japan