User`s guide

6
495-14797
2. At the front of the carrier, hold the modem vertically, with the latch on its faceplate
in the open position, and insert it into the top and bottom card guides of one of the
slots numbered 1–16.
Slide the modem into the slot, aligning the modem with the rear connector plate,
until the backplane connector and DTE connector seat firmly into the back of the
carrier. To lock the modem into the carrier, press the faceplate latch until a click is
heard.
3. Rotate the circuit pack lock(s) into the closed position, and tighten the screw.