System information

3. Commands
3-50 July 2004 4821-A2-GB21-00
Configure Interface DSL State
Configure Interface DSL VLAN PVID
configure interface dsl {port_id} state {disabled | enabled | reset}
Minimum Access Level: Administrator
The configure interface dsl state command specifies the availability of a ADSL port.
port_id – Identifies the port to be configured.
state – Specifies the availability of the port. Valid choices are disabled, enabled or reset. The default is
enabled.
Example:
PDYN# configure interface dsl 1/24 state enabled
configure interface dsl {port_id:pg} vlan pvid {pvid}
Minimum Access Level: Administrator
The configure interface dsl vlan pvid assigns the VLAN ID to be assigned to untagged frames or
Priority-Tagged frames received on the ingress of this port.
port_id:pg - This specifies the ADSL port number and the priority group on that port.
pvid - The VLAN tag. Valid values are 1 through 4095. The default is 1.
Example:
PDYN# configure interface dsl 1/1 vlan pvid 1