Datasheet

Vpacket 5100/6100 Series H.323 Telephony 25
Setting the answer-side clear detect
You can set the answer-side clear detect by issuing the set tcid [tcid] fxsls answ_clear_detect
command. This command applies only to models with FXS voice interface ports.
Syntax: set tcid [tcid] fxsls answ_clear_detect <value in ms>
Argument:
value in ms
Example:
In this example, the answer-side clear detect is set to 4 ms.
telephony# set tcid 2 fxsls answ_clear_detect 4
OK
telephony#