Datasheet

CHAPTER 5
H.323 commands
40 Vpacket 5100/6100 Series H.323 Telephony
Example:
In this example, the H.323 fast start mode is enabled on the outgoing call handling.
Setting the H.323 fast start mode for the incoming side
You can select the H.323 Faststart mode on the incoming call handling by issuing the set h323
in_fast_start command.
Syntax: set h323 in_fast_start [on | off]
Note. This command is effective immediately; activate and restart are not required.
Argument:
on | off
Example:
In this example, the H.323 fast start mode is set for the incoming call handling.
Viewing H.323 display name
You can view the configured H.323 display name by issuing the show h323 display_name
command.
Syntax: show h323 display_name
Example:
In this example, the H.323 display name is “Vpacket VDR-6100.”
telephony# set h323 out_fast_start on
OK
telephony# 11/08/2001:13:22:55 - HSMU: Set param function.
telephony# set h323 in_fast_start on
OK
telephony# 11/08/2001:13:23:29 - HSMU: Set param function.
VPacket# tel
telephony# show h323 display_name
h323 display_name = 'Vpacket VDR-6100'
telephony#