Specifications

6381-A4 Router Users Guide 104
Egress Layer 2 Configuration
The Egress Layer 2 feature enables you to map the CoS of an outgoing packet to user priority
bits, which is honored by the VLAN network. This feature is available on the WAN interface only.
Interface
Select the WAN/LAN interface here to configure the QoS for outgoing traffic to
the IP network.
Default Non-IP
Locally generated packets (such as ARP packets) do not have a CoS marking.
You can define the CoS for all unclassified outgoing packets on layer 3 using
this field. The selections are (in the order of descending priority): CoS1, CoS2,
CoS3, CoS4, CoS5, and CoS6. The default value is CoS1 (recommended).
Translated ToS
The Type of Service field takes values from 1 to 255. The selections are 0, 1, 2,
3, 4, 5, 6, 7.
Class of Service
The selections are (in the order of descending priority): CoS1, CoS2, CoS3,
CoS4, CoS5, and CoS6.