Specifications

6381-A4 Router Users Guide 55
Firewall / NAT Services
The default setting for firewall and NAT services is enabled.
Enable/Disable DHCP
By default, the router has DHCP server (LAN side) disabled. If you already have a DHCP server
running on your network, do not enable the router’s DHCP server.
To enable DHCP:
1. From the navigation bar at the top, click Setup.
2. Under LAN Setup, select LAN Configuration.
This will bring up the LAN Configuration Screen.
3. In the LAN Group 1 window, click the Configure link to the right of the LAN group 1
window.
The LAN Group 1 Configuration screen appears.