User`s guide

8900-A2-GB20-50 August 2005 iii
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to configure and operate the Models
8955-B1, 8965-B2, 8968-B1, 8975-B1, and 8985-B2 ATM line cards, and is
intended for installers and operators. Basic installation information can be found in
the ATM Line Cards, Models 8955, 8965, 8968, 8975, and 8985, Installation
Instructions.
Document Summary
Section Description
Chapter 1, About the ATM Line
Cards
Describes the cards’ features and capabilities.
Chapter 2, Accessing the SCP
Card Web Interface
Provides instructions for accessing the user interface.
Chapter 3, Configuration Using
the Web Interface
Provides instructions for configuring the line cards.
Chapter 4, Monitoring Describes how to locate information about a line card
and its status.
Chapter 5, Diagnostics Provides instructions for running a lamp test and
loopback test.
Chapter 6, Maintenance
Procedures
Provides instructions for uploading or downloading a
configuration, downloading firmware, and resetting the
card.
Appendix A, Connector Pin
Assignments
Lists the pin assignments for the Broadband Loop
Carrier (BLC) Telco connectors.
Appendix B, Technical
Specifications
Contains physical and regulatory specifications, and
power consumption values.
Index Lists key terms, acronyms, concepts, and sections in
alphabetical order.