Specifications

Reference Guide B-15
Restricted field.
You cannot access the Superuser password field on the CPU Card Main Screen. This password
is factory-assigned.
Selected ADPCM can be primary only.
The current ADPCM card cannot be a redundant card.
Selected circuit is not primary.
The current circuit is redundant, not a primary circuit.
Selected circuit is under the test already.
The current circuit is already being tested.
Service table is currently used by profile.
You cannot change the service table on the ISDN configuration screen when the service is
selected and stored in an Interface card call profile.
Simultaneous loopback tests not allowed.
You cannot activate two or more loopbacks at the same time.
SNMP Options not available on this CPU.
The current CPU card does not support SNMP configuration.
Specify Sys Ph# before activating REMOTE vt100.
You must enter the integrated access system’s phone number before a remote operator can
connect to the system.