User's Manual
GB-13
Listen to radio
Note:
* Only FM radio reception is available on this unit.
Tune to a radio station
Note:
* Position the antenna as far as possible from
TV, VCR or other radiation source.
* For optimal reception, fully extend and adjust
the position of the antenna.
1. Press FM ( or SOURCE on the top panel) to
select FM tuner.
2. Press and hold TUNE
−
/ +
button
on the top
panel (or press
TUNING
I
/
J
button
on the
remote control) for more than 2 seconds, the
radio tunes to a station with strong reception
automatically.
3. Repeat step 2 to tune to more stations, to
tune to a weak station, press TUNE −
/ +
button
on the top panel (or press TUNING
I
/
J
button
on the remote control) repeatedly
until you nd optimal reception.
Note:
* [STEREO] is the default setting for tuner mode.
* In tuner mode, you can press OK button
repeatedly to toggle between [STEREO] and
[MONO], and the unit memorizes your
setting even if you turn off the unit or turn to
other sources.
Program radio stations automatically
You can program a maximum of 20 preset radio
stations.
In tuner tuner mode, press a hold MODE (or
PROG
on the top panel) on for 2 seconds to
activate automatic program mode. [AUTO]
is display, the unit automatically stores radio
stations with sufcient signal strength, the rst
programmed radio station is broadcast automati-
cally.
Program radio stations manually
You can program a maximum of 20 preset radio
stations.
1. Tune to a radio station.
2. Press PROG button to activate the program
mode.
3. Press /
( or press
H
/
G
button on
the remote control) to select a number.
4. Press OK button to conrm.
5. Repeat the above steps to program other
stations.
Note:
* To over write a programmed station, store
another station in its place.
* To select FM stereo or FM mono, press OK.
Select a preset radio station
In tuner mode, press /
on the top panel ( or
press
H
/
G
on the remote control) to select
a preset number.
Show RDS information
RDS (Radio Data System) is a service that al-
lows FM stations to show additional information.
If you tune to an RDS station, an RDS icon and
the station name are displayed.
1. Press DISPLAY repeatedly to scroll through
the following information (if available):
● Station name
● Program type such as [NEWS](news),
[SPORT](sport), [POP M](pop music)...
● Frequency
Note:
* There are denitions of RDS program types.
Synchronize clock with RDS station
You can synchronize the clock time on the unit
with an RDS station.
1. Tune to an RDS radio station that transmits
time signals.
2. Press the DISPLAY button repeatly to check
the CT
3. When the clock been display,press the OK
button to synchronize RDS clock