Installation Instructions

21 3 4 5
MovingLife
2. DOWNLOAD AND SET UP
THE APPLICATION
Search “MovingLife” in “App Store” or
“Google Play” to download the Application.
Or in another most convenient way by
scanning the QR code below.
Tips：APP is keeping updating, so it may
differ from showed on manual. For the final
and accurate information, please check on APP.
3. REGISTERING AND CONNECTING
4. START WEIGHING
Open APP “MovingLife”, connect the device
with APP and submit your personal profile.
(Before connection, please make sure Bluetooth
is turned on and scale LCD is lighted up)
Note：Please make sure your setted personal
information is correct, in order to get accurate
measurements.
The LCD is lighted up
Step gently to
turn on the scale
Connect the
scale with APP
Place the scale on hard and flat floor.
Stand on the scale with bare feet. The
weight reading is stable and flashes,
then begins to be transmitted. The scale
shuts off after several seconds. APP will
show and save all indexs and history record.
Place the scale
on hard and
flat floor.
Keep your bare feet
on the electrodes of
scale.
Check the
measurement
data on APP.
Note:
To make a proper measurement of body fat,
please keep your bare feet on the electrodes
of scale.
10~100100~250cm
5. BUTTONS FUNCTION & PERSONAL
PARAMETERS SETTING
Turn on the scale and prompt to next
parameter.
Value up by each interval press.
Press and hold the button to have
consecutive value added.
Value down by each interval press.
Press and hold the button to have
consecutive value reduced
Note：
1. If the model has no button,please set
personal parameters on APP.
2.The buttons are only for visitors and the
default user code is 0. You can’t set user
code on scale, APP will distribute one code
automatically. Please set personal parameters
on APP.
Male/
Female
Parameters can be set in the following range:
Gender Height Age
SET
6. MULTIPLE USERS SUPPORTED
1. BATTERY INSTALLATION
AND CHARGING
(1) If it's powered by 4 or 2 pcs AAA batteries,
please install as shown below:
First Use: Open the battery cover on the back
of scale and put out the insulating strip.
Change battery: Open the battery cover on the
back of scale, then install the batteries properly
according to the pictures shown below.
Note：After battery installation,please close
the battery cover. Please use corresponding
battery. Remove battery if it is not used for a
long time(more than three months).
The scale can be connected with multiple
users and each user can save max.15 sets
data. Data will be synchronized once APP
is switched on.
Note: Final user amount depends on the product.
(2) If the scale is with built-in rechargeable
battery
1. The scale should be fully charged when firstly
used or after long-time stored. Battery symbol
flashes during charging and displays constantly
when charging is finished. It takes about 2 hours
to finish.
2. Please use standard 5V charger with output
current equal to or more than 0.5A.
3. Suggest to charge every 3 months if the scale
is not used for a long time.
Remark:
Battery symbol is shown on LCD during charging.
For your safety, please do not use the scale during
charging. Only start weighing after charging is
finished and removing charger.
App: MovingLife
Fat Measuring
Thin
Slim
Normal
Heavy
Overweight
Hydration%
Fat status
indication
Muscle%Bone
Fat%
LCD with
yellow backlight
LCD with
blue backlight
LCD with
green backlight
LCD with
orange backlight
LCD with
red backlight
Over-load Indication
Low Fat% Indication
Low Battery Indication
Calibration
High Fat% Indication
7. LCD ICONS INDICATION
Icons Indication
Icons Indication
Icons Indication
IndicationIcons
Note: Only for product with colorful LCD display.