User's Manual

12
5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer
and then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.
NOTE:
• If the wireless connection fails again, check if there is conflict or strong interference
(for example, interference from an electronic device) around your location. Remove these conflicts
or strong interferences and repeat the above procedures.
• The subwoofer should be within 6m of the soundbar in an open area.
• If a TV or an external device is connected, the main unit only AUX model and the subwoofer will
switch on automatically when the TV or the external device is switched on.
• If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator
will flash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.
Basic Operation
Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
- Press the button on the unit or on the remote control to switch the unit ON.
- Press the button again to switch the unit back to STANDBY mode. The POWER indicator will
light up red.
- Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
- When the unit no input signal (or weak input signal) , the unit will automatically switch to Standby mode.
Select Modes
Press the SOURCE button repeatedly on the unit or the AUX1, AUX2, HDMI ARC, OPTICAL/COAXIAL
and BT (Bluetooth) buttons on the remote control to select the desired mode.
In AUX 1 mode: STANDBY/AUX1 Indicator light up Green.
In COAXIAL mode: COAXIAL/AUX2 Indicator light up Orange.
In AUX 2 mode: COAXIAL/AUX2 Indicator light up Orange flash.
In BT (Bluetooth) mode: BLUETOOTH Indicator light up Blue.
In HDMI ARC mode: HDMI ARC/OPTICAL Indicator light up Orange.
In OPTICAL mode: HDMI ARC/OPTICAL Indicator light up Orange flash.
Adjust the Volume
- Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
- If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume
normal listening.
- While adjusting the volume, the status indicator ashes quickly.
- While the volume level reaches its maximum level, if you press the VOL+ button again, the status
indicator ashes once. While the volume level reaches its minimum level, if you press the VOL-
button again, the status indicator ashes once.