User's Manual

13
Select a Preset Sound Effect
While playing, press the FLAT or MOVIE or MUSIC buttons on the remote control to select between
preset equalisers: Movie (recommended for viewing movies), Music (recommended for listening to
music), FLAT (EQ mode off ).
AUX / HDMI ARC / OPTICAL / COAXIAL Operation
1 Ensure that the unit is connected to the TV or audio device.
2 Press the SOURCE button repeatedly on the unit or the AUX1, AUX2, HDMI ARC, COAXIAL and
OPTICAL buttons on the remote control to select the desired mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.
Tip: While in HDMI ARC or OPTICAL mode, if there’s no sound output from the unit, you may need to
activate PCM or Dolby Digital Signal output on your source device (eg. TV, DVD or Blu-ray player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to this
player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 During ON mode, press the SOURCE button repeatedly on the unit or the BT button on the
remote control to select Bluetooth mode. The Blue indicator will light flash.
2 The system has entered pairing mode.
- Or press and hold the "
BF
/PAIR" button on the remote control or on the unit to be searchable.
After the “Pairing” voice prompt and the Blue indicator will flash rapidly.
3 Activate your Bluetooth device and select the search mode. “TB230WW” will appear on your
Bluetooth device list.
4 Select “TB230WW” in the pairing list. After the “Paired” voice prompt, the system is successfully
connected and the Blue indicator will light up solidly.
5 Play music from the connected Bluetooth device.