User's Manual

9
Remove the screws from the main unit.
Attach the wall brackets to the main unit with
the screws removed from the main unit.
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 764 mm.
Leave a 5 mm gap between the wall and the screw’s head. Lift the unit with the attached wall
brackets over the heads of the screws and slot into place.
Firmly fix 1 dowel into each hole in the wall
if necessary.
Dowel
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
764 mm
6!nn
Connections
Use the HDMI (ARC) Socket
TV
HDMI (ARC)
ARC (Audio Return Channel):
- With the ARC (Audio Return Channel) function, it allows you to send audio input from your
ARC-compliant TV to ARC-compliant audio devices (e.g. soundbar) without the need to connect
an audio cable.
- To enjoy the ARC function, make sure main unit the HDMI (ARC) socket is connected by an HDMI
cable (not included) to the HDMI (ARC) socket of your ARC-compliant TV. Then, just use your TV
remote control to adjust the volume output (VOL +/– and MUTE) of the connected audio device.
NOTE
- Your TV must support the HDMI-CEC and ARC and the HDMI-CEC and ARC must be set to On.
- The setting method of HDMI-CEC and ARC may dier depending on the TV. For details about ARC
function, please refer to the owner’s manual.