Manualshelf

User's Manual

ManualsBrandsZhongshan City Richsound Electronic Industrial ManualsAudio Equipment2.0 CH Soundbar, 2.1 CH Soundbar with Wire Subwoofer
9101112131415161718
16
GB
Connecting the Subwoofer to the Soundbar
Connect the subwoofer cable into the SUBWOOFER OUT sockect of the soundbar.
t Connecting the unit to any other power source may damage the unit.
t Ensure all audio connections of the unit are connected before connecting to the mains power socket.
t Make sure the mains plug is rmly inserted into the mains socket.
t To switch the unit o completely, remove the mains plug from the mains socket.
t Please turn the unit o completely to save energy when not in use.
t The mains cable are designed for this JVC soundbar only. DO NOT use the mains cable for other
purposes.
Connecting to the Mains Supply
The soundbar is designed to operate with the supplied mains cable.
Soundbar
Unwind the mains cable to its full length. Connect the end of the cable to the AC~ Socket
at the rear of the unit and then connect the mains plug to the mains socket. Make sure the
mains plug is fully inserted into the mains socket.
To the
mains socket
Rear View of the Soundbar
Front View of the Subwoofer
Rear View of the Soundbar
TH-D337H_IB_170505_will.indd 16 5/5/2017 4:19 PM