User's Manual

Wall Mounting

t Installation must be carried out by qualied personnel only. Incorrect assembly can result in severe

personal injury and property damage (if you intend to install this product yourself, you must check

for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the

installer’s responsibility to verify that the wall will safely support the total load of the soundbar.

t Additional tools (not included) are required for the installation.

t Do not overtighten screws.

t Keep this instruction manual for future reference.

t Use an electronic stud nder to check the wall type before drilling and mounting.

1. Remove the screws from the main unit.

764 mm

Wall (Front view)

3. Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance

between the holes should be 764 mm.

2. Attach the wall brackets to the main unit with the screws removed from the main unit.

TH-D337H_IB_170505_will.indd 10 5/5/2017 4:19 PM