User's Manual

9
General Operation
Standby/ON
When you first connect the unit to the mains socket, the unit will be in standby mode and the
Standby Indicator will be red.
• Pressthe button to switch the main unit ON.
• Pressthe button again to switch the unit back to STANDBY mode. The POWER indicator will
light up red.
• DisconnectthemainsplugfromthemainssocketifyouwanttoswitchtheunitOFF
completely.
- If the unit is idle for over 15 minutes, the unit will automatically switch to Standby mode.
Select Modes
Press the SOURCE button repeatedly on the unit or on the remote control to switch between
AUX, OPTICAL, MP3 Link and BLUETOOTH modes.
Adjust the Volume
• PresstheVOL +/– button to adjust the volume.
• Ifyouwishtoturnthesoundoff,presstheMUTE button on the remote control. Press the
MUTE button again or press the VOL +/- button to resume normal listening.
• Whileadjustingthevolume,thestatusindicatorashesquickly.
• Whilethe volumelevel reachesits maximum level,if youpress theVOL + button again, the
statusindicatorashesonce.Whilethevolumelevelreachesitsminimumlevel,ifyoupressthe
VOL –buttonagain,thestatusindicatorashesonce.
Select the Equalizer
While playing, press the EQ button on the remote control to select between preset equalizers:
Movie (recommended for viewing movies), Music (recommended for listening to music).
- When AUX or OPTICAL mode is selected, the equaliser will be set to MOVIE. The Music/
Movie Indicator will light up solidly.
- When BLUETOOTH or MP3 LINK mode is selected, the equaliser will be set to MUSIC. The
Music/Movie Indicator will flash.
AUX/OPTICAL/Mp3 Link Operation
1 Ensure that the Sound Stand is connected to the TV or audio device.
2 Press the SOURCE button repeatedly on the unit or on the remote control to switch
between AUX or OPTICAL or Mp3 Link mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.