User's Manual

11
Listen to Music from Bluetooth Device
• If theconnectedBluetoothdevicesupports AdvancedAudioDistributionProfile(A2DP),
you can listen to the music stored on the device through the player.
• Ifthe devicealsosupports AudioVideoRemoteControlProfile(AVRCP),you canusethe
player’s remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
BF
button.
- To skip to a track, press the
H
,
G
buttons.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems
when using this unit, check the following points before requesting service.
No power
• Ensurethemainscableisconnectedsecurely.
• Makesurethattheunitisswitchedon.
The remote control does not function
• Usetheremotecontrolneartheunit.
• Pointtheremotecontrolattheremotecontrolsensorontheunit.
• Replacethebatteryintheremotecontrolwithanewone.
• Removeanyobstaclesbetweentheremotecontrolandtheunit.
Loud hum or noise is heard
• Theplugsandsocketsaredirty.Wipethemwithaclothslightlymoistenedwithan
appropriate non-abrasive cleaning solution.
The unit does not respond when pressing any buttons
• Theunitmayfreezeupduringuse.Switchtheunitoffandthenonagainatthemains
socket to reset the unit.
No sound output
• Makesurethattheunitisnotmuted.PressMUTEorVOL+toresumenormallistening.
• Ensuretheaudiosettingoftheinputsource(e.g.TV,gameconsole,DVDplayer,etc.)isset
to PCM mode while using optical connection.
The sound output effect sounds unfamiliar
• PressEQontheremotecontroltoselectpresetEQmodefortheoptimalsoundoutput
effect.