User's Manual
11
Listen to Music from Bluetooth Device
• If theconnectedBluetoothdevicesupports AdvancedAudioDistributionProfile(A2DP),
you can listen to the music stored on the device through the player.
• Ifthe devicealsosupports AudioVideoRemoteControlProfile(AVRCP),you canusethe
player’s remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
BF
button.
- To skip to a track, press the
H
,
G
buttons.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems
when using this unit, check the following points before requesting service.
No power
• Ensurethemainscableisconnectedsecurely.
• Makesurethattheunitisswitchedon.
The remote control does not function
• Usetheremotecontrolneartheunit.
• Pointtheremotecontrolattheremotecontrolsensorontheunit.
• Replacethebatteryintheremotecontrolwithanewone.
• Removeanyobstaclesbetweentheremotecontrolandtheunit.
Loud hum or noise is heard
• Theplugsandsocketsaredirty.Wipethemwithaclothslightlymoistenedwithan
appropriate non-abrasive cleaning solution.
The unit does not respond when pressing any buttons
• Theunitmayfreezeupduringuse.Switchtheunitoffandthenonagainatthemains
socket to reset the unit.
No sound output
• Makesurethattheunitisnotmuted.PressMUTEorVOL+toresumenormallistening.
• Ensuretheaudiosettingoftheinputsource(e.g.TV,gameconsole,DVDplayer,etc.)isset
to PCM mode while using optical connection.
The sound output effect sounds unfamiliar
• PressEQontheremotecontroltoselectpresetEQmodefortheoptimalsoundoutput
effect.