User's Manual

12
Play iPod/iPhone
You can enjoy audio from an iPod/iPhone through this unit.
1 Place the iPod/iPhone into the dock.
- This apparatus does not support Apple 30 pin
models.
2 Press the button on the main unit or press
the DOCK/USB button on the remote control
to select the IPOD mode.
3 Start to play the connected iPod/iPhone.
- To pause/resume play, press the
BF
button.
- To skip to a track, press the
H
/
G
buttons
on the unit or on the remote control.
- Press and hold the
H
/
G
buttons on the
unit or on the remote control to perform fast
forward/reverse playback. Release the button to resume normal playback.
- To select repeat play options: press the REPEAT button repeatedly to select a repeat option play
mode.
- To select shue play options: press the SHUFFLE button repeatedly to select a shue option play
mode.
Charge the iPod/iPhone
- The docked iPod/iPhone begins to charge as soon as the unit is connected to AC power.
Bluetooth Operation
The unit has a Bluetooth function that can receive a signal within 8 metres.
Pair Bluetooth-enabled Devices
- The operational range between this player and a Bluetooth device is approximately 8 meters (without
any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 Press the button on the main unit or press the BT/AUX button on the remote control to select
BT(Bluetooth) mode. “NO BT” will show on the display if the unit is not paired to any Bluetooth device.
2 The system has entered pairing mode.
- Or press and hold the "
BF
/PAIR" button on the remote control or the "
BF
" button on the unit to
be searchable. The Bluetooth indicator will ash rapidly. The display will show “PAIR”.
3 Activate your Bluetooth device and select the search mode. “inStudio 8021091” will appear on your
Bluetooth device.
4 Select “inStudio 8021091” in the pairing list. Display panel shows “BT” while the pairing succeeds.
5 To disconnect the Bluetooth function, switch to another function on the unit or disable the function
from your Bluetooth device.