Manualshelf

User's Manual

ManualsBrandsZhongshan City Richsound Electronic Industrial ManualsElectronicsIs Vertical CD BT Dock Micro System
78910111213141516
13
Tips:
- Enter “0000” for the password if necessary.
- If a connection exist, press and hold "
BF
/PAIR" button on the unit or "
BF
" button on remote control
to re-activate the pairing mode, the connection will be interrupted.The display will show “PAIR”.
- If no other bluetooth device pairs with this player within two minutes, the player will recover its previous
connection.
- The player will also be disconnected when your device is moved beyond the operational range.
- If you want to reconnect your device to this player, place it within the operational range.
- If the device is moved beyond the operational range, when it is brought back, please check if the device
is still connected to the player.
- If they are connected, display panel shows "BT".
- If the connection is lost, display panel shows "NO BT". Follow the instruction above to pair your device to
the player again.
NFC (Near Field Communication) Operation
Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Activate NFC on your mobile device.
2. Tap the mobile device on the "nfc" icon of the unit.
3. Operate your mobile device directly for playback
features.
4. Tap again on the "nfc" icon of the unit to disconnect.
5. Disable NFC from your mobile device if needed.
- This function only works with mobile devices that support NFC technology.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports Advanced Audio Distribution Prole (A2DP), you can
listen to the music stored on the device through the player.
- If the device also supports Audio Video Remote Control Prole (AVRCP), you can use the player’s
remote control to play music stored on the device.
1 Pair your device with the player.
2 Play music via your device (if it supports A2DP).
3 Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
BF
button.
- To skip to a track, press the
H
,
G
buttons.
AUX Operation
1 Press the button on the main unit or press the BT/AUX button on the remote control to select
AUX mode.
2 Operate your audio device directly for playback features.
3 Press the VOL +/– button to adjust the volume to your desired level.
4 In AUX mode, operate your audio device directly for playback features.