User's Manual

3
Before the first time to use BH1000-1C, you should charge the battery of BH1000-1C
for about 2 hours.
Next time charge BH1000-1C
When you see the indicator light turns to red from blue, the battery capacity of
adapter is not enough and need to be recharged. If you don’t charge the battery at this
time, it will be switched of automatically in 10 minutes.
Remark: After using the battery for long time, the battery performance will gradually decline
and the charging time will be longer than before.
Notice: 1.Please recycle the battery and reuse.
2.Don’t put battery in the fire, in case of explosion.
Charge the battery of BH1000-1C as below,
Step1 Plug Mini USB of charger into charging jack
Step 2 Connect charger with power outlet
Step3 While charging, indicator light color is red. It takes about 2 to 3 hours to charge
buttery full.
Step4 After finish charging, indicator light will turn off. At that time, you can disable
BH1000-1C with the USB cable.
When the battery is full, you can enjoy the stereo music for about 9 hours.
2.2 Pair BH1000-1C with Bluetooth music devices
BH1000-1C can pair with Bluetooth music devices which support A2DP profile, such
as Bluetooth stereo headset and Bluetooth speaker whose pin code is “0000”
Before using BH1000-1C to enjoy your music, BH1000-1C must pair with Bluetooth
music device. Keep BH1000-1C and Bluetooth music device in one meter.
For example, pair BH1000-1C with Bluetooth Stereo Headset as below,
Step1 Make sure your headset is under pairing status. For the detail of pairing status
of headset, please refer to your user manual of headset.
Step2 Make sure BH1000-1C is under pairing status. When the adapter is turned off,
press the switch on/off button until the red light and blue light blink
alternately ( the time is about 2~3 seconds).