User's Manual

5
3) Attach the windshield mount to the car’s windshield
Attach the windshield mount to the car’s windshield. Press on the windshield
mount to exhaust the air so it is properly secured to the windshield.
 Basic operation
1. Turning the BTC003 on/off
Function Operation
LCD
indicator
Indication
tone
Turning on BTC003
Press ON/OFF button for about 2
seconds
BTC003 4 rising tones
Turning off BTC003 Press ON/OFF button for 3

5
seconds
GOOD BYE 4 falling tones
Entering pairing mode When turning off, pre
ss
ON/OFF button for 6

7 seconds
Pairing... 2 lowering
“DU-DU” tones
Reset and power off
Press ON/OFF button and
volume+ button simultaneously
to reset BTC003
None
2. Pairing with a Bluetooth cell phone
You have to pair the hands-free car kit with Bluetooth cell phone before first using
it. Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps
may vary with different cell phones. Please refer to your cell phone’s user manual
for further information. The pairing steps are as follows:
1) Keep BTC003 and your Bluetooth cell phone within 1 meter when pairing;
2) Make sure BTC003 is turned off, otherwise turn it off;
3) Press and hold the MFB button for about 6

7 seconds, until the LCD screen
displays “Pairing…”. Now BTC003 entered pairing mode;
4) Turn on your cell phone’s Bluetooth function and search for Bluetooth devices.
After the search is completed, select “BTC003” from the Bluetooth device list;
5) According to indication, enter password or PIN No:”0000”, and press ” Yes” or
“confirm”;
6) After successful pairing, select “BTC003” from the Bluetooth device list, and
press “connect”. After successful connecting, the LCD screen will display the
name of cell phone.
Remarks: