User's Manual

9.LED indicators and indication tone
The status of the
handsfree kit
LED indicators Indication tone
Charging Red LED is on
Finish charging Red LED is off
Pairing mode
Blue and red LED
flashes alternately
Standby mode (not
connected with
Bluetooth device)
Blue LED flashes 1 time
every 2 seconds
Standby mode
(connected with
Bluetooth de
Blue LED flashes 2
times every 4 seconds
Ringing
Blue LED flashes
quickly
Conversation mode Blue LED is on steady
Low power
Red LED flashes twice
every 10 seconds
2 tones every 5
seconds
 Care and maintenance
Please read the following suggestions carefully, that will help you to fulfill
any warranty obligations and enjoy this product for many years.
 Keep dry and don’t put it in the dump place, so as not to affecting the
interior circuit of product.
 Don’t put the product under the sunlight or place in the hot areas. High
temperature will shorten the life of electronic device, destroy the battery,
or distort certain plastic.
 Don’t expose the product in the cold areas. It may damage the internal
circuit board.
 Don’t try to take apart the product. It may damage the product if you are
not professional.
 Don’t fall off on the floor or knock the hard substance. It may damage
interior circuit.
 Don’t use intensify chemical or detergent to clean the product.
 Don’t scrap the surface with sharp things.
If the product can’t work normally, please send it to the regularly asserted
store. The staff will help you to solve the problem warmly.