User's Manual

any Bluetooth device after 5 minutes while it disconnects with the
hands-free car kit.
2. Pairing the Bluetooth headset with a Bluetooth cell phone
You have to pair the Bluetooth headset with a Bluetooth cell phone before first
using the headset. Please make sure your cell phone is Bluetooth-enabled.
Specific pairing steps may vary with different cell phones. Please refer to your
cell phone’s user’s manual for further information. The general pairing steps
are as follows:
1) Keep the Bluetooth headset and your Bluetooth cell phone within 1 meter
when pairing;
2) Make sure the Bluetooth headset is off, otherwise turn it off;
3) Press and hold the MFB button for about 6.5 seconds, release it when you
see the red and the blue LED flashing alternately. The Bluetooth headset
has now entered pairing mode;
4) Turn on your cell phone’s Bluetooth function and search for Bluetooth
devices. After the search is completed, select “BTC006” from the Bluetooth
device list;
5) According to the indication, enter password or PIN No:”1234”, and
press ”Yes” or “confirm”;
6) After successful pairing, select “BTC006” from the Bluetooth device list
and press “connect”. If the connection is successful, the Blue LED of the
Bluetooth headset will flash twice every 4 seconds.
Remarks:
 The pairing mode will last 2 minutes. The Bluetooth headset will switch to
standby mode automatically if it can’t pair with any device after 2 minutes.
If you want to continue pairing the Bluetooth headset with a Bluetooth cell
phone, please switch off the Bluetooth headset first and then try re-pairing
according to steps 1 ～ 6 mentioned above.
 The Bluetooth headset can remember 8 paired devices. When the number
of paired devices exceeds 8, the first one will be replaced.
 When the Bluetooth headset is switched on but doesn’t connect to any
device, you can press MFB button to make the Bluetooth headset connect
with the last connected device.
 Every time you turn on the Bluetooth headset, it will connect to the last
connected device automatically. If you want to pair it with other devices,
please turn off the Bluetooth function of the last connected devices first,
and then pair Bluetooth headset with new device according to steps 1 ～ 6
mentioned above.