User's Manual

1) Insert the car kit into your car’s cigarette lighter socket;

2) Make sure your car kit is off, otherwise turn off the car kit first (please

refer to “turning the car kit on/off”);

3) Press and hold the red button for 7-8 seconds and release it when

the red and blue LEDs flash alternately. The car kit entered pairing mode;

4) Switch on your cell phone’s Bluetooth function and search for Bluetooth

devices. After the search has been completed, select “BTC009” from the

Bluetooth device list.

5) According to indication, enter password or PIN No:”0000” and

press ”Yes” or “confirm”;

6) After successful pairing, select “BTC009” from the Bluetooth device list

and press “connect”. The blue LED will flash once every 5 seconds when

the connection is established.

Remarks:

 Pairing mode will last 2 minutes. The car kit will exit pairing mode

automatically if it can’t be connected to any device within 2 minutes. If

you want to continue to pair the car kit with a Bluetooth device, please

turn it off first and re-pair according to steps 1-6 mentioned above.

 After successful pairing the car kit and your cell phone will remember

each other. The devices don’t have to be re-paired at next use unless the

pairing information is deleted because of a new pairing.

 The car kit can remember 8 paired devices. When the number of paired

devices exceeds 8, the old ones will be replaced starting with the first.

 Every time you turn on BTC009 it will try to connect to the last

connected device automatically. If you want to pair it with another device,

please switch off the paired device’s Bluetooth function first and pair the

car kit with the new device according to steps 1

～

6 mentioned above.

2. Turning the car kit on/off

Function Operation

Turn on the

car kit

Press and hold the red button for about 3-5 seconds

until the blue LED flashes

Turn off the

car kit

Press and hold the red button for about 3-5 seconds

until the red LED flashes