User's Manual

different models of cell phones. Please refer to your cell phone user’s

manual for further information.

The general pairing procedures are as follows:

1) Keep your headset turned off and within 1 meter of phone ;

2) Press and hold about 4 seconds until the red and blue LED flash

alternately, and the headset emits”Pairing”.

3) Activate your cell phone’s Bluetooth function and search for Bluetooth

devices within range, select “BTH070N” from the list of devices shown

(enter password “0000 ” if the headset prompt);

4) After successful connecting, blue LED of headset flashes twice every 4

seconds and emits”Your headset is connected”.

Remarks:

 Pairing mode will last 2 minutes, the headset will back to standby mode

if the pairing failure.

 Every time the headset is turned on, it will connect to last connected

device automatically.

 When the headset is on standby mode short press any button it will

connect with the last connected devices.

 The headset will disconnected if out of range with devices.It will

re-connecting automatically if back to effective range within 5

minutes,after 5 minutes it will be on standby mode and turn off

automatically if beyond 10 minutes.

2) Pairing headset with Bluetooth transmitter via Bluetooth

You can connect the headset to a Bluetooth transmitter to enjoy music

wirelessly. Hereby take BTT005 (Bluetooth transmitter, not included in

accessories) for example. The pairing steps are as follows:

1) Keep your headset and transmitter within

1 meter when pairing;

2) Make the headset enter pairing mode

3) Turn on the Bluetooth transmitter and

make it enter paring mode. It will

search for Bluetooth devices automatically

and send a pairing request;

4) After successful pairing and connecting,

blue LED of the headset flashes twice every 4 seconds and prompt one

short‘DU”.