User's Manual

３
3. Backup Key
Remove the cover cap (2 ways).
Method 1: Press the end of the outer handle to pry up the cap.
Method 2: Insert a needle into the little hole to push the cap off.
Insert the key and turn right 90 degree. Press down the handle to open door.
Notice: Please put the backup keys in other place.
4.Initialization
Remove the battery cover and press the “SET” button for 5 seconds, lock will sound a
short beep, and the screen shows “Initializing. Please wait…” After initialization, all the data
and settings will be cleared, the lock will back to default setting. The initial admin password
is “123456”.