Specifications

Important safety precautions
For best results, it is recommended that you use
this unit in a dark room.
1. Do not install it in places where water vapor or
temperature is too high, which may lead to failure
of the machine
2. Ensure adequate ventilation, and the air outlet
at the bottom is not blocked, so as not to
accumulate heat in the machine
3, to prevent foreign matters, such as paper
scraps, paper clips, etc. from falling into the
machine, do not insert any metal objects, such as
wire screwdriver into the machine, do not place
any liquid on the machine to avoid leakage, such
as accidental occurrence, be sure to cut off the
power supply immediately, and contact
professional maintenance
4. When carrying the projector, please use soft
packaging. In order to protect the lens from being
scratched, please try not to touch the lens
The bottom air outlet should not be placed on the soft surface, otherwise it
will affect the overall heat dissipation performance of the machine
Important safety precautions
In order to maintain the performance and reliability of the
projector, at least 30CM of space should be left between the
projection and the wall
Do not install in an unventilated area
Do not install in high temperature and humidity
Do not settle the bottom in a soft place
Stay away from the dust
Important safety precautions
Don't open
Stay away from the water
With a soft cloth
No chemicals
Don't block the lens
Don't look at the camera with your eyes
Disconnect the power
when not in use
Understanding the Remote control
installation
horizontal
Condole top installation
Important Safety Matters
Projected range reference
The data are
for reference
only
The
screen size
Adjustable JiaoHuan
Adjustable JiaoHuan
Focus: when the image is blurred, adjust the focus ring
on the fuselage to obtain a satisfactory image effect. If
the resolution cannot be achieved through adjustment,
please move the product forward and backward
according to the circumstances.
Trapezoidal correction: when trapezoidal distortion
occurs, the user needs to adjust the electronic
trapezoidal correction in the Settings
Image fuzzy
The picture is for reference only
2
.
Retract the lens with a focus twist and store it safely
The following steps can turn off the projector and
store the equipment safely
Press the top of the projector
Or on the remote control
key
Safety shutdown
focusing
Projector specification
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interferenceto radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.