Instruction Manual

Instruction manual
Connect the power supply, the machine can enter the working state. Chip RB6819
operating frequency 125KHZ. The transmitter drives the transmit coil with AC signal,
while monitoring the ac voltage and current signals. The receive coil is placed on the
transmit coil. By magnetic induction, AC voltage can be generated in the receiver coil.
After this signal is rectified by the rectifier, the DC output voltage can be obtained. By
way of voltage regulation ,can be used to drive the application load.
Output power adjustment through the one-way digital control circuit to complete. By
means of backscatter that modulates the received AC power signal, the receiver
continuously sends back the power demand signal to the transmitter. The power to be
supplied to the receiver can be changed after the transmitter demodulates and
decodes these power demand signals and adjusts the coil drive signal.
Standard wireless power transmission system
FCC ID: 2ASKZ-QT160-U