TETON USER MANUAL HOME AUDIO • CAMBRIDGE
CONTENTS US Contents ������������������������������������������������������������������������������������������������������������������������ 2 Controls & Functions ����������������������������������������������������������������������������������������������������� 3 Box Contents ����������������������������������������������������������������������������������������������������������������� 5 Additional Info ������������������������������������������������������������������������������������������������
CONTROLS & FUNCTIONS US FRONT, SIDE, AND REAR VIEW 2 1 1. Speaker drivers 2. Remote control sensor 3. 4 5 6 7 3 LED Indicator Light 4. On/Off 5. Change mode (BT, OPTICAL, AUX, RCA, USB, ARC). 6. Adjust volume 7. AUX in socket 8. Bluetooth pair button 8 9 9. USB socket 10. RCA socket 11. ARC/HDMI in socket 12. OPTICAL in socket 13.
CONTROLS & FUNCTIONS US REMOTE CONTROL 14 23 15 24 14. Power on/off 15. Bass increase/decrease 16. Volume + 17. Back: Use in Bluetooth and USB 16 modes to go back a track. 17 25 18. Play/Pause: In Bluetooth/USB mode, press to pause/play media. 18 19 20 26 19. Volume - 20. Treble increase/decrease 21. Media modes: Select Music, Dialogue or Movie EQ mode 21 22. 22 Flat: Press to reset EQ settings to default 23. Mute/Unmute 24. Input: Press to switch between modes 25.
BOX CONTENTS US WHAT’S IN THE BOX? A. Majority Teton Soundbar E. RCA Stereo Audio Cable B. Remote Control F. HDMI Cable C. Instructions Guide G. Optical Cable D. 3.5mm to 3.5mm Audio cable H.
US ADDITIONAL INFO Automatic Power Off Function The Majority Teton will automatically go to standby mode after 180 minutes if the connected TV is switched off, or if there is any audio signal in. Wall mounting The Majority Teton can be mounted to a wall using the appropriate fittings for your wall type by using the wall mounting brackets positioned at the rear of the unit. As these differ between wall types the fittings are not included.
MODE INDICATOR LIGHTS & AUDIO SETTINGS US MODE INDICATOR LIGHTS State Indicator Lights Power off Red AUX mode Green USB mode Purple RCA mode White ARC mode Light blue Optical mode Yellow Bluetooth ready Flashing blue Bluetooth connected Blue AUDIO SETTINGS Mode MUSIC DIALOG MOVIE Bass/Treble Options Db (decibels) refers to sound level. Manually change BASS and TREBLE settings (between 0Db and +8Db).
US USB INPUT USING THE USB INPUT 1. Connect your USB device to the USB jack (Ref.9) on the soundbar. 2. Press the ‘INPUT’ button (Ref.24) on the remote, and the LED indicator will be Purple. 3. Play music files from the USB device through the soundbar.
RCA INPUT US USING THE RCA INPUT Use the RCA Stereo Audio Cable to connect the TV’s stereo RCA(L/R) audio output socket to the RCA(L/R) Sockets of the unit (Ref.10). Then press the INPUT button on the remote control (Ref.24) or press the INPUT button on the soundbar (Ref.5) to choose the AUX function. Troubleshooting: If you are not receiving a picture or encountering interference, please ensure that the RCA cable is being connected to ‘output’ RCA ports on your TV set.
US ARC INPUT USING THE ARC (HDMI) INPUT Connect the HDMI cable (included) to the HDMI ARC connector on the back of the unit to the HDMI (ARC) connector on the TV. NOTE: In the HDMI ARC mode, if your speakers have no audio output and the indicator light is flashing quickly, use your source device (such as a TV, CD player, or cable/ satellite receiver).The audio output mode is set to PCM, or turn off the sound source output.
OPTICAL INPUT US USING THE OPTICAL INPUT You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (included). Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the soundbar (Ref.12). Press the POWER button on the side panel (Ref.4) or on the remote control (Ref.14) to switch on the unit. Press the INPUT button on the remote control repeatedly (Ref.24) to switch to Optical mode or press the INPUT button (Ref.
US AUX/LINE IN INPUT USING THE MP3 LINK CONNECTION (AUX IN) Plug one end of a 3.5mm audio input cable (included) into the Line in (Ref.7) on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs. Plug the other end of the cable into the audio output/ headphone output on an MP3 player or other audio source. Press the POWER button on the side panel (Ref.4) or on the remote control (Ref.11) to switch on the unit. Press the INPUT button repeatedly on the soundbar (Ref.
CONNECTING TO THE POWER OUTLET US CONNECTING TO THE MAINS SUPPLY Ensure that the power supply voltage is within the range of 100V~240V. Any other voltage may cause damage to the unit. Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Ensure that the mains plug is fully inserted into the mains socket. The mains plug/appliance coupler is used as the disconnect device. The disconnect device must remain readily operable. Connect the adapter into the soundbar AC Socket (Ref.
US BLUETOOTH BLUETOOTH OPERATION Pairing a Bluetooth Device for the First Time Press the POWER button on the soundbar (Ref.4) or on the remote control (Ref.14) to switch on the unit. Press the INPUT button repeatedly on the remote control (Ref.24) or press the INPUT button on the soundbar (Ref.5) repeatedly until Bluetooth mode is selected (indicated by a flashing blue light). From your Bluetooth device, select the “Majority Teton” when prompted to choose a Bluetooth device.
TROUBLESHOOTING US TROUBLESHOOTING If you encounter an issue with your soundbar, please refer to the following checklist. Observation Potential Cause/Solution No power/function Check that the power is switched on at the wall. Check that the power adaptor is properly connected to the power outlet. No sound Check whether the unit is set to MUTE. Check that cables are properly installed. If cables are properly installed, please try connecting to your TV using an alternative cable.
SPEC, SUPPORT & WARRANTY US SPECIFICATION Power Supply DC 18V 1.5A Frequency Response 30Hz-20KHz SNR 70dB Separation 45dB Bluetooth V5.0 Dimension (WxHxD) 81.2 x 9.6 x 10.2cm Net Weight 1.5kg SUPPORT If you require further assistance with your new soundbar, please contact our support team on the Majority website: www.majority.co.uk/support WARRANTY All products come with a standard 12 month warranty. All items must be registered on www.majority.co.uk for the warranty to be valid.
REGULATORY INFORMATION US NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
US SAFETY INFORMATION 1. Read these instructions. ADDITIONAL WARNINGS 2. Keep these instructions. Instructions are also availa- The apparatus shall not be exposed to dripping or splash- ble for download at www.majority.co.uk ing and no objects filled with liquid, such as vases, shall 3. Heed all Warnings be places on the apparatus. 4. Follow all instructions Main plug is used to disconnect device and it should 5.
HOME AUDIO • CAMBRIDGE WWW.MAJORITY.CO.