Product Specs

珠海顶智电子科技有限公司
http://www.qualmodule.com/
should be installed and operated with minimum distance 20cm between the radiator & your body.
IMPORTANT NOTES
Co-location warning:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
OEM integration instructions:
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used
with the external antenna(s) that has been originally tested and certified with this module.
As long as the conditions above are met, further transmitter test will not be required. However, the OEM integrator is
still responsible for testing their end-product for any additional compliance requirements required with this module
installed (for example, digital device emissions, PC peripheral requirements, etc.).
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered
valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator
will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End product labeling:
The final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID:
2ATZK-DZ-I5005”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this
RF module in the user's manual of the end product which integrates this module. The end user manual shall include all
required regulatory information/warning as show in this manual.
Integration instructions for host product manufactures according to KDB 996369 D03 OEM Manual v01
2.2 List of applicable FCC rules
FCC Part 15 Subpart C 15.247 & 15.207 & 15.209
2.3 Specific operational use conditions
The module is a Bluetooth module with WiFi & BLE 2.4G function.
WiFi Specification：
Operation Frequency: 2412~2462MHz Number of Channel: 11
Modulation: DSSS
Type: PCB Antenna
Gain: 1 dBi
BLE Specification：
Operation Frequency: 2402~2480MHz Number of Channel: 40
Modulation: GFSK Type: PCB Antenna Gain: 1 dBi
The module can be used for mobile or applications with a maximum 1dBi antenna. The host manufacturer installing this
module into their product must ensure that the final composit product complies with the FCC requirements by a
technical assessment or evaluation to the FCC rules, including the transmitter operaition. The host manufacturer has to
be aware not to provide information to the end user regarding how to install or remove this RF module in the user's
manual of the end product which integrates this module. The end user manual shall include all required regulatory
information/warning as show in this manual.
2.4 Limited module procedures