Product Specs

珠海顶智电子科技有限公司
http://www.qualmodule.com/
Overview
The OPL1000 SoC features a fully integrated 2.4GHz radio transceiver and baseband
processor for Wi-Fi 802.11b and Bluetooth® Smart applications.The SoC can be used as a
standalone application-specific communication processor or as a wireless data link in hosted MCU
systems where ultra-low power is critical. The OPL1000 supports flexible memory architecture for
storing profiles, stacks and custom application codes, and can be updated using Over-The-Air
(OTA) technology. Qualified Bluetooth Smart protocol stack and Wi-Fi TCP/IP stack are stored in a
dedicated ROM. The OPL1000 is equipped with dual processors, ARM® Cortex®-M0 and M3, for
handling different processes. All software runs on the ARM® Cortex®-M0 processor while more
intensive application-specific activities run on the ARM® Cortex®-M3 processor. The OPL1000
can be connected to any external MCU through SPI, I2C or UART interfaces and sensors or other
devices through GPIOs. The transceiver interfaces directly to the antenna and is fully compliant
with the Wi-Fi 802.11b and Bluetooth 5.0 BLE standards. With integrated antenna switch, RF
balun, power amplifier (PA) and low noise amplifier (LNA), the OPL1000 allows both Wi-Fi and
Bluetooth Smart to minimize PCB design area and external component requirement.
Features
The OPL1000 complies with ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC
CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
Processors
 ARM® Cortex® -M3 Application Processor
 ARM® Cortex® -M0 Link Controller
Wi-Fi
 802.11b up to 11Mbps
 Supports STA mode
 WPA/WPA2 security supported
 Automatic beacon scanning and discovery
 Built-in TCP/IP stack
 Integrated dual power amplifiers: low (-2 dBm), high (+10 dBm) †
Optional internal T/R switch by-pass mode available to increase to +12dBm
Bluetooth Smart
 Compliant with Bluetooth 5.0 BLE specifications with 1Mbps rate capability
 Slave mode support
 Adaptive Frequency Hopping (AFH)
 All GATT-based profiles supported
 Built-in BLE stack
 Max. 8 concurrent BLE connections supported
 2 to 12 dBm transmit output power
 -80 dBm receive sensitivity
Memories
 4kb One-Time-Programmable (OTP) memory
 384 kB System SRAM
 768 kB ROM
HW Crypto Engine
 AES-128/256 bits Encryption
 P-192/256 ECDH (Elliptic Curve Diffie-Hellman) Key Generation
 SHA2
 TRNG