User Manual

Oplink Communications

1 / 3

DGL1130 User Guide

I. Product Introduction

DGL1130 is a kind of 433MHz wireless signal transceiver, using for receiving and

transmitting control signal from its matched devices, matched devices are products

which can transfer control signal remotely, such as alarm systems, door openers,

remote switches etc.

System Structure

PAGE 1
Oplink Communications DGL1130 User Guide I. Product Introduction DGL1130 is a kind of 433MHz wireless signal transceiver, using for receiving and transmitting control signal from its matched devices, matched devices are products which can transfer control signal remotely, such as alarm systems, door openers, remote switches etc.
PAGE 2
Oplink Communications II. Installation & Workflow DGL1130 has an USB port, it is plug and play and no installation or configuration work needed. Please plug the USB port to the computer or other recognizable devices and it will start to work. 1) When the sensor, which should be matching its system, is triggered, the DGL1130 will receive a 433MHz hex string signal. 2) DGL1130 will transmit the signal to the host device (like a matching Router or AP).
PAGE 3
Oplink Communications NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.