User's Manual

IPCAM User Manual

If you use TPLINK router, please refer to these instructions

Through the upnp automatic mapping port to the network: input router IP address in the browser (such

as "http://192.168.1.1/ >, the router IP addresses are written on paper label on the router house---- please set

according to your own IP address), open the routers page" forward rules "> >" upnp set ", to ensure that the

current state of upnp is "already available," as below:

Note: some of the router interface without "UPNP Settings" option, then need to open the virtual server IP

cameras in the local area network of mapping the connection IP address and port number

6 Access IP camera via mobile equipment

such as mobile phone,Ipad Etcs.

There are two kinds of ways to access IP camera: One is to input IP address in browser directly, It can be IP

address and also can be DDNS. Another is to use clients to visit.

6.1 Input IP address in browser

1 We take IPAD as example as blows

Open browser "Safari"