User's Manual

IPCAM User Manual

7 Other setting

7.1 Network Setting

7.11 Basic Network Settings

Http Port: In most cases, you can leave this value as 80, however, if your Internet

Service Provider blocks this port, you may switch to another port number such as, 85 8080 8888 9000 Etcs.

(Range from 0 to 65535, pay attention to the same segment of multiple devices must set up different port. The

port t can t have any conflict with other software or equipment

a. Search tools modification in LAN

b. For administor Basic network setting -Change the port

Figure52

7.12 WIFI Setting

1) Please enter the wireless net setting page of the wireless Router to find out SSID,

Channel(less than 10), Encryption Authentication as below:

Select IP Camera, clickright mouse button choice network configuration

Set port number

Set Network IP

Set Http Port Number