User's Manual

IPCAM User Manual

IO linkage alarm output: relay closure, external alarm device began to alarm

Send E-mail alarm informatio

Transmit pictures to the FTP server, and can set the time interval of sending pictures;

1) Alarm time Settings

Only in the alarm period, detection device to alarm will only have alarm action. All the time (not check the

schedule) also can alarm within specified time. For the specified time alarm, firstly need to set up the system

time, time zone, and then to choose period of alarm in the state of alarm setting, as shown in Picture 19.

Picture88 Alarm of time Settings interface

Motion Detect Armed

When you enable motion detect armed, the camera can be triggered to send email alerts

and record images. In the camera monitoring page, the green icon turn to red and an

alert sound you will hear,

Motion Detect Sensibility

You can choose from low to high 10 level alarm sensitivity. The greater the number, the higher the

sensitivity

Alarm Input Armed

I/O PINS:1) Output(+5V) 2) Output 3) Alarm input 4) Input (GND)

Input Pins: The input pins can be used for 1-way external sensor input(pin3 and pin4). For example,

you may connect a Person Infrared Sensor (PIR) to it for motion detection. When

external sensor triggered, IPCAM can be programmed to send an email with picture or

control the internal relay output.