User's Manual

Introduction

Thanks for choosing the Oplink wireless transmitter of the home security device.

This transmitter when door arm or disarm is opened and closed.

Product Description and Specification

Specification:

Package Content:

Protocol: 433.92Mhz

Operating Range: Up to 200 feet line of sight

Operating Temp.: -15°C~ 60°C (5°F ~140°F)

Battery: Panasonic CR2032 * 1PC

1pc

PNB1301 Transmitter

CR2032 Lithium Battery

Installation & Operation manual

Installation

1. Before insert the battery, put home security control into learning mode. Once put CR2032

battery into the battery compartment and push the button then LED will light 1 time, and

PNB1301 Transmitter will automotive included into system.

Operation

1. Opening the Transmitter push button, the Transmitter will send signal to the controller, and

the LED will light 1 time.

2. Normal operation, the LED will not light.

3. If Transmitter is in low battery status, it will report a message to controller, and LED will

flash slow. Please change the battery.

-2-