Technical Specs

Bluetooth 5.0 SIG Mesh
LM-60-12-U1B2
— 01 — www.ltech-led.com
Intelligent LED Driver (Constant Voltage)
Small size and light weight. Adopt SAMSUNG/COVESTRO V0 flame resistant
polycarbonate protective housings.
Bluetooth 5.0 SIG Mesh with high networking capability are reliable and stable.
Support control iOS or Android devices through Bluetooth connection.
With soft-on and fade-in dimming function, enhancing your visual comfort.
The whole dimming process is flicker-free with high frequency exemption level.
Dimming from 0~100%, down to 0.1%.
Comply with the EU’s ErP Directive, stand-by power consumption<0.5W.
The secure and reliable design for signal isolation.
Innovative thermal management technology protects the power life intelligently.
Overheat, over voltage , overload, short circuit protection and automatic recovery.
Suitable for indoor light applications of
Ⅰ/Ⅱ/Ⅲ
type.
Up to 50,000-hour life time.
2-year warranty (Rubycon capacitor).
Flicker-free
IEEE 1789
Dimmable
：
0.1%~100%
Use only within an enclosure.
Overheat
protection
Class 2
The certification icon represents on-going certification applications only, and final certification qualification is subject to actual products.
V
Over voltage
protection
Overload
protection
Sho rt circuit
protectio n
Technical Specs
Model
LM-60-12-U1B2
OUTPUT
Output Voltage
12Vdc
Output Voltage Range
12Vdc ± 0.5Vdc
Output Current Max. 5A
Output Power
Max. 60W
Output Power Range
0-60W
Strobe Level
High frequency exemption level
PWM Frequency 3600Hz
Dimming Range
0~100%, down to 0.1%
Overload Power Limitation
≥102%
Ripple & Noise
Switch ripple≤200mV, noise≤400mV
INPUT
Dimming Interface
Bluetooth 5.0 SIG Mesh
Input Voltage
120-277Vac
Frequency
50/60Hz
Input Current
0.6A/120Vac, 0.35A/230Vac, 0.3A/277Vac
Power Factor
PF>0.99/120Vac, PF>0.95/230Vac, PF>0.9/277Vac (at full load)
THD
120Vac@THD ＜ 5%, 230Vac@THD ＜ 7%, 277Vac@THD ＜ 10% (at full load)
Efficiency (typ.)
90%
Standby Power Loss <0.5W
Inrush Current
Cold start 45A/230Vac (Test twidth = 840us under 50% Ipeak)
Anti Surge
L-N: 2KV
Leakage Current
Max. 0.5mA
ENVIRONMENT
Working Temperature
ta: -20~50°C tc: 85°C
Working Humidity
20-95%RH, non-condensing
Storage Temperature,Humidity
-40~80°C, 10-95%RH
Temperature Coefficient
±0.03%/°C(-20~50°C)
Vibration
10~500Hz, 2G 12min/1cycle, 72 min for X, Y and Z axes respectively
PROTECTION
Overheat Protection
Intelligently adjust or turn off the output current if the PCB temperature ≥110°C, and recover automatically
Overvoltage Protection
Shut down the output when non-load voltage≥14V, and recover automatically
Overload Protection
Shut down the output when current load≥102%, and recover automatically
Short Circuit Protection
Enter hiccup mode if short circuit occurs, and recover automatically
SAFETY
&
EMC
Withstand Voltage I/P-O/P: 3750Vac
Isolation Resistance
I/P-O/P: 100MΩ/500VDC/25°C/70%RH
Safety Standards
UL
America
UL8750
CUL
Canada
CSA C22.2 NO. 250. 13
CE
European Union
EN61347-1, EN61347 - 2 - 13, EN62384
EMC Emission
UL
America
FCC part 15
CE
European Union
EN55015, EN61000-3-2, EN61000-3-3, EN61547
EMC Immunity
EN61000-4-2,3,4,5,6,8,11, EN61547
Strobe Test Standard
IEEE 1789
OTHERS
Gross weight(G.W)
285g±10g
Dimensions
293×42.5×30mm(L×W×H)
Package size
296×44×33mm(L×W×H)
Carton Size
315×230×215mm(L×W×H) 30pcs / ctn 9.35kg±5%/ctn
The driver is suitable for connecting resistor current-limiting LED fixture (e.g. LED strip). The inrush current will be dozens of times increased if connecting built-in constant current IC current-limiting LED fixtures, the driver will activate the overloaded
protection (hiccups flickering). When you order, please remark controlling the constant current LED fixture (e.g. MR16 lamp, underground light, LED wall washer, constant current LED strip, etc.), so that we can prepare them with special procedures.